Copyright(c)1996, by Yoshimiti ENDOU. All rights reserved.
1. Whai is MoveIt!
The MoveIt! is a small cdev program that moves mousepointer to the default button in the dialog.
2. How to use MoveIt!
1).Install MoveIt!
Please put MoveIt! into the cdev folder, or drag & drop onto system folder and restart Macintosh.
2).Remove MoveIt!
Please remove MoveIt! from cdev folder and restart Macintosh. MoveIt! dose not change system resourse and dose not make preference file.
3. Compatibility
1)Please turn off the "wake up mouse move" switch of screen saver(AfterDrak etc...). If that switch is on,when screen saver works, MoveIt! moves mousepointer ,then wake up screen, as a result screen saver can not work.
2)If you use 68K macintosh , Please set 32 bit addressing mode. 32 bit addressing mode can setup by memory cdev panel. Especialy caution when you clear P-RAM. (when you clear P-RAM,Macintosh set 24 bit address automatically) In 24 bit addressing mode,MoveIt! can not work.
Of course MoveIt! can works under Power Macintosh.
3)MoveIt! can not work with tablet. Because tablet uses absolute axis. Even MoveIt! moves mousepointer, mousepointer is removed to before position by tablet.
4)Default button is not always drawn double line. Often programer dose not draw doube line and draw picture like a default button, then MoveIt! somtimes moves mousepointer to another button or nomal button.
6)MoveIt! works unser system7 or lator.
I use MoveIt! under Kanji-Talk 7.5(7.5.2),Power Macintosh 7500/100
7)I hear,MoveIt! is not compatibility with Ram Charger,
But MoveIt! is works with Ram Doubler,and Speed Doubler.
4.About MoveIt!
MoveIt! is freeware.You must use it on your risk.
If you fined bugs or etc, then mail to GFE00726@niftyserve.or.jp .
Thank you to read this "Japanese-English" document, Because I am not good at English, then you can not understand this document. Even if you can understand, MoveIt! works on your Macintosh. Try! and use MoveIt!.
